Show simple item record

dc.contributor.authorNicholas Tsolas
dc.contributor.authorSanjeev Chandra
dc.date.accessioned2017-05-09T00:52:12Z
dc.date.available2017-05-09T00:52:12Z
dc.date.copyrightJune, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27943#062602_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149446
dc.description.abstractA thermal spray coating process was used to deposit dense 2 mm thick metal skins on the surfaces of square cross-section channels (300 mm × 20 mm × 20 mm) of nickel and copper foams with 10 and 40 PPI (pores per inch) pore densities. A heater was wrapped around the channels to apply surface heat-fluxes varying from 427 to 6846 W/m2 . Compressed air was blown through the channels at flow rates of 5–80 l/min. Foam and fluid temperature distributions along the length of the channel and the pressure drop across it were measured. The foam was modeled as a porous medium and properties such as permeability K and inertial coefficient CF were determined from the experimental data. Local and average convective heat transfer coefficients were calculated from air and foam temperature measurements. Nusselt numbers were calculated and correlated in terms of the Reynolds, Prandtl, and Darcy numbers. Heat transfer to air flowing through a 10 PPI foam channel was shown to have increased nearly seven times compared to that of hollow tube with the same dimensions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleForced Convection Heat Transfer in Spray Formed Copper and Nickel Foam Heat Exchanger Tubes
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue6
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4006015
dc.journal.fristpage62602
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsFoams (Chemistry)
dc.keywordsCopper
dc.keywordsNickel
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsHeat transfer
dc.keywordsFluids
dc.keywordsHeat exchangers
dc.keywordsMetal foams
dc.keywordsConvection
dc.keywordsSprays
dc.keywordsForced convection
dc.keywordsHeat flux
dc.keywordsPressure drop
dc.keywordsHeat transfer coefficients
dc.keywordsTemperature
dc.keywordsDimensions
dc.keywordsFluid dynamics
dc.keywordsPorous materials
dc.keywordsHeat AND Permeability
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record