Show simple item record

dc.contributor.authorB. A. Younis
dc.contributor.authorB. Weigand
dc.contributor.authorA. Laqua
dc.date.accessioned2017-05-09T00:52:07Z
dc.date.available2017-05-09T00:52:07Z
dc.date.copyrightJuly, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27945#071702_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149417
dc.description.abstractThis paper reports on the prediction of heat transfer in a fully developed turbulent flow in a straight rotating channel with blowing and suction through opposite walls. The channel is rotated about its spanwise axis; a mode of rotation that amplifies the turbulent activity on one wall and suppresses it on the opposite wall leading to reverse transition at high rotation rates. The present predictions are based on the solution of the Reynolds-averaged forms of the governing equations using a second-order accurate finite-volume formulation. The effects of turbulence on momentum transport were accounted for by using a differential Reynolds-stress transport closure. A number of alternative formulations for the difficult fluctuating pressure–strain correlations term were assessed. These included a high turbulence Reynolds-number formulation that required a “wall-function” to bridge the near-wall region as well as three alternative low Reynolds-number formulations that permitted integration through the viscous sublayer, directly to the walls. The models were assessed by comparisons with experimental data for flows in channels at Reynolds-numbers spanning the range of laminar, transitional, and turbulent regimes. The turbulent heat fluxes were modeled via two very different approaches: one involved the solution of a modeled differential transport equation for each of the three heat-flux components, while in the other, the heat fluxes were obtained from an explicit algebraic model derived from tensor representation theory. The results for rotating channels with wall suction and blowing show that the algebraic model, when properly extended to incorporate the effects of rotation, yields results that are essentially identically to those obtained with the far more complex and computationally intensive heat-flux transport closure. This outcome argues in favor of incorporation of the algebraic model in industry-standard turbomachinery codes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePrediction of Turbulent Heat Transfer in Rotating and Nonrotating Channels With Wall Suction and Blowing
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4006014
dc.journal.fristpage71702
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsHeat
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsTurbulence
dc.keywordsSuction
dc.keywordsReynolds number
dc.keywordsFlux (Metallurgy)
dc.keywordsStress
dc.keywordsHeat flux
dc.keywordsRotation
dc.keywordsEquations
dc.keywordsPressure AND Turbulent heat transfer
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record