Show simple item record

dc.contributor.authorZenghui Zhao
dc.contributor.authorRichard A. Wirtz
dc.date.accessioned2017-05-09T00:52:06Z
dc.date.available2017-05-09T00:52:06Z
dc.date.copyrightJuly, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27945#071501_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149411
dc.description.abstractMetallic porous structures have proved to be effective in enhancing heat transfer due to the inherent characteristics such as high specific surface area and large pore densities. In this study, structured-porous fins were built from plain weaved copper wire mesh screens. Seven test articles were made, with pore hydraulic diameter varying from 214 μm to 48 μm. Boiling experiments were conducted with Isopentane, a highly wetting fluid, flowing through the porous fin. The tested system pressure varies from 2 bars to 5 bars, and the channel Reynolds number from 2000 to 10,000. Influences of system pressure, flow rate, and pore sizes (mesh number) on flow boiling performance were investigated. The mechanisms for the influences were discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow-Through Boiling of Isopentane in Structured-Porous Fins: Effects of System Parameters
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4006164
dc.journal.fristpage71501
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsBoiling AND Pressure
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record