Show simple item record

dc.contributor.authorSebastian Spring
dc.contributor.authorYunfei Xing
dc.contributor.authorBernhard Weigand
dc.date.accessioned2017-05-09T00:52:03Z
dc.date.available2017-05-09T00:52:03Z
dc.date.copyrightAugust, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27947#082201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149387
dc.description.abstractA combined experimental and numerical investigation of the heat transfer characteristics within arrays of impinging jets with rib-roughened surfaces is presented. Two configurations are considered: One with an inline arrangement of jets and ribs oriented perpendicular to the direction of cross-flow and one with a staggered arrangement of jets and broken ribs aligned with the direction of cross-flow. For both cases, the jet Reynolds number is 35,000, the separation distance measures H/D = 3, the spent air is routed through one exit contributing to the maximum cross-flow condition, and the rib height and width is both 1 D. The experiments are carried out in perspex models using the transient liquid crystal method. Local jet temperatures are measured at several positions on the impingement plate to account for an exact evaluation of the heat transfer coefficient. In addition to the measurements, a numerical analysis using the commercial CFD software package ANSYS CFX is conducted. Heat transfer predictions are compared with those obtained from experiments with regards to local distributions as well as averaged quantities. A good overall agreement is found but discrepancies for local values need to be accepted. The present investigation also emphasizes that configurations including rib roughness elements should be compared based on the amount of transferred heat flux in order to account for the area enlarging effect. This allows a correct evaluation of the thermal performance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental and Numerical Study of Heat Transfer From Arrays of Impinging Jets With Surface Ribs
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4006155
dc.journal.fristpage82201
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer
dc.keywordsJets
dc.keywordsComputational fluid dynamics
dc.keywordsCross-flow
dc.keywordsSurface roughness
dc.keywordsTemperature AND Heat transfer coefficients
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record