Show simple item record

dc.contributor.authorLei Zhang
dc.contributor.authorDefu Che
dc.date.accessioned2017-05-09T00:52:00Z
dc.date.available2017-05-09T00:52:00Z
dc.date.copyrightSeptember, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27949#091802_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149362
dc.description.abstractThe double notched (DN) plate is commonly used in rotary air preheaters, but relevant investigations are rare. Thus, thermal-hydraulic performances of the DN plate are investigated in this paper. A single-blow, transient technique is refined and then used to measure the overall mean heat transfer coefficients and friction factors. A validated numerical method is also utilized to provide local information. The measured results show that the performance of the DN plate approaches that of the double undulated (DU) plate and lies between that of the cross corrugated (CC) plate and the parallel plate. No swirling flow pattern is identified in the predicted velocity fields. Basically, two types of flow are observed: wavy channel flow and pipe flow. High or low Nusselt numbers, Nu, are obtained at the luff or lee side of undulations and notches, respectively. Nu values increase and Nu distributions become more homogenous with increasing Reynolds numbers, Re. A recommendation is made that the DN plate be operated under moderate Re to achieve homogenous and enhanced heat transfer, given the allowable pressure drop.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental and Numerical Investigation on the Thermal-Hydraulic Performance of Double Notched Plate
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue9
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4006210
dc.journal.fristpage91802
dc.identifier.eissn1528-8943
dc.keywordsTemperature
dc.keywordsHeat transfer
dc.keywordsFluids
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsFlow (Dynamics)
dc.keywordsPressure drop
dc.keywordsPipe flow
dc.keywordsChannel flow
dc.keywordsNumerical analysis
dc.keywordsComputer simulation
dc.keywordsSwirling flow
dc.keywordsHeat transfer coefficients
dc.keywordsPlates (structures) AND Friction
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record