Show simple item record

dc.contributor.authorD. A. Cruz
dc.contributor.authorP. M. Coelho
dc.contributor.authorM. A. Alves
dc.date.accessioned2017-05-09T00:51:59Z
dc.date.available2017-05-09T00:51:59Z
dc.date.copyrightSeptember, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27949#091703_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149359
dc.description.abstractIn this work, we propose an approximate methodology to estimate the Nusselt number and friction factor in fully developed non-Newtonian laminar flow in circular pipes for a constant wall heat flux. The methodology was tested using several constitutive equations, including generalized Newtonian fluids and viscoelastic models such as the simplified Phan-Thien–Tanner (sPTT), Herschel–Bulkley, Bingham, Casson, and Carreau–Yasuda constitutive equations. The error of the approximate methodology was found to be smaller than 3.2%, except for the fluids with yield stress for which the maximum error increased to about 8% for the cases analyzed, which cover a wide range of shear viscosity curves.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Simplified Method for Calculating Heat Transfer Coefficients and Friction Factors in Laminar Pipe Flow of Non-Newtonian Fluids
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue9
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4006288
dc.journal.fristpage91703
dc.identifier.eissn1528-8943
dc.keywordsFriction
dc.keywordsFluids
dc.keywordsViscosity
dc.keywordsShear (Mechanics)
dc.keywordsErrors
dc.keywordsPipes
dc.keywordsNon-Newtonian fluids
dc.keywordsLaminar flow
dc.keywordsHeat transfer
dc.keywordsPipe flow AND Heat transfer coefficients
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record