Show simple item record

dc.contributor.authorY. J. Lee
dc.contributor.authorP. S. Lee
dc.contributor.authorS. K. Chou
dc.date.accessioned2017-05-09T00:51:58Z
dc.date.available2017-05-09T00:51:58Z
dc.date.copyrightOctober, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-926055#101901_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149341
dc.description.abstractSectional oblique fins are employed, in contrast to continuous fins in order to modulate the flow in microchannel heat sinks. The breakage of a continuous fin into oblique sections leads to the reinitialization of the thermal boundary layer at the leading edge of each oblique fin, effectively reducing the boundary layer thickness. This regeneration of entrance effects causes the flow to always be in a developing state, thus resulting in better heat transfer. In addition, the presence of smaller oblique channels diverts a small fraction of the flow into adjacent main channels. The secondary flows created improve fluid mixing, which serves to further enhance heat transfer. Both numerical simulations and experimental investigations of copper-based oblique finned microchannel heat sinks demonstrated that a highly augmented and uniform heat transfer performance, relative to the conventional microchannel, is achievable with such a passive technique. The average Nusselt number, Nuave , for the copper microchannel heat sink which uses water as the working fluid can increase as much as 103%, from 11.3 to 22.9. Besides, the augmented convective heat transfer leads to a reduction in maximum temperature rise by 12.6 °C. The associated pressure drop penalty is much smaller than the achieved heat transfer enhancement, rendering it as an effective heat transfer enhancement scheme for a single-phase microchannel heat sink.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEnhanced Thermal Transport in Microchannel Using Oblique Fins
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4006843
dc.journal.fristpage101901
dc.identifier.eissn1528-8943
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsHeat sinks
dc.keywordsMicrochannels
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer
dc.keywordsFins AND Pressure drop
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record