Show simple item record

dc.contributor.authorGiovanni A. Longo
dc.date.accessioned2017-05-09T00:51:57Z
dc.date.available2017-05-09T00:51:57Z
dc.date.copyrightOctober, 2012
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-926055#101801_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149340
dc.description.abstractThis paper presents the experimental heat transfer coefficients and pressure drop measured during HC-600a (isobutane), HC-290 (propane), and HC-1270 (propylene) vaporization inside a brazed plate heat exchanger (BPHE): the effects of heat flux, refrigerant mass flux, saturation temperature (pressure), evaporator outlet condition, and fluid properties are investigated. The experimental tests include 172 vaporization runs carried out at three different saturation temperatures (10, 15, and 20 °C) and four different evaporator outlet conditions (outlet vapor quality around 0.80 and 1.00, outlet vapor super-heating around 5 and 10 °C). The refrigerant mass flux ranges from 6.6 to 23.9 kg m−2 s−1 and the heat flux from 4.3 to 19.6 kW m−2 . The heat transfer and pressure drop measurements have been complemented with IR thermography analysis in order to quantify the portion of the heat transfer surface affected by vapor super-heating. The heat transfer coefficients show great sensitivity to heat flux, evaporator outlet condition and fluid properties and weak sensitivity to saturation temperature (pressure). The frictional pressure drop shows a linear dependence on the kinetic energy per unit volume of the refrigerant flow and therefore a quadratic dependence on refrigerant mass flux. HC-1270 exhibits heat transfer coefficients 6–12% higher than HC-290 and 35–50% higher than HC-600a and frictional pressure drops 5–10% lower than HC-290 and 60% lower than HC-600a. The experimental heat transfer coefficients are compared with two well-known correlations for nucleate boiling and a linear equation for frictional pressure drop is proposed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHydrocarbon Refrigerant Vaporization Inside a Brazed Plate Heat Exchanger
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4006817
dc.journal.fristpage101801
dc.identifier.eissn1528-8943
dc.keywordsTemperature
dc.keywordsHeat transfer
dc.keywordsVapors
dc.keywordsBoiling
dc.keywordsPressure drop
dc.keywordsRefrigerants
dc.keywordsHeat flux
dc.keywordsHeat transfer coefficients
dc.keywordsHeat exchangers
dc.keywordsSuperheating
dc.keywordsFlow (Dynamics) AND Pressure
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record