Show simple item record

dc.contributor.authorNoel L. Chester
dc.contributor.authorMary A. Wells
dc.contributor.authorVladan Prodanovic
dc.date.accessioned2017-05-09T00:51:51Z
dc.date.available2017-05-09T00:51:51Z
dc.date.copyright41244
dc.date.issued2012
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-926520#ht_134_12_122201.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149295
dc.description.abstractThe heat transfer that occurs during bottom water jet impingement on a hot steel plate has been investigated in terms of the effect inclination angle and flow rate. This research was carried out to develop quantitative knowledge of the heat transfer, which occurs on the runout table, a crucial component in the hot rolling production of advanced high strength steels. Industrially produced hot-rolled steel samples were instrumented with numerous subsurface thermocouples installed close to the quench surface. The experimental measurements were used in conjunction with an inverse heat conduction (IHC) model to quantify boiling characteristics as well as heat extraction histories for the different nozzle inclination angles and flow rates. It was found that, as nozzle inclination angle increased, the degree of asymmetry of the cooled region on the surface of the sample was increased and the overall rate of heat extraction decreased. The angle of inclination had a significant effect on overall heat extraction; a vertical nozzle was the most efficient from a perspective of heat transfer under the nozzle. As expected, as flow rates increased, the amount of heat energy extracted increased for all the conditions studied, regardless of the nozzle inclination.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Inclination Angle and Flow Rate on the Heat Transfer During Bottom Jet Cooling of a Steel Plate
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4007127
dc.journal.fristpage122201
dc.identifier.eissn1528-8943
dc.keywordsHeat transfer
dc.keywordsCooling
dc.keywordsSteel
dc.keywordsWetting (Surface science)
dc.keywordsFlow (Dynamics)
dc.keywordsHeat
dc.keywordsWater
dc.keywordsBoiling
dc.keywordsTemperature AND Thermocouples
dc.treeJournal of Heat Transfer:;2012:;volume( 134 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record