Show simple item record

dc.contributor.authorA. Mirahmadi
dc.contributor.authorK. Valefi
dc.date.accessioned2017-05-09T00:51:47Z
dc.date.available2017-05-09T00:51:47Z
dc.date.copyrightFebruary, 2012
dc.date.issued2012
dc.identifier.issn2381-6872
dc.identifier.otherJFCSAU-28952#011008_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/149273
dc.description.abstractElectrolyte of the solid oxide fuel cells deposited by atmospheric plasma spraying of 8 mol.% yttria (8YSZ), is not applicable in as sprayed condition. Optimization of the plasma spraying process parameters or application of feedstock powder, consisting of 8YSZ and 5wt.% alumina improves the problem of gas leakage through electrolyte layer, whereas provides no solution to the problem of electrodes short-circuiting. Infiltration of deposited electrolyte layer with a thin aqueous solution of nitrate precursors of 8YSZ for one time is a solution to high gas permeability; however three infiltration cycles are required to omit the risk of electrodes short circuiting thoroughly.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDensification of Plasma Sprayed SOFC Electrolyte Layer Through Infiltration With Aqueous Nitrate Solution
dc.typeJournal Paper
dc.journal.volume9
dc.journal.issue1
dc.journal.titleJournal of Fuel Cell Science and Technology
dc.identifier.doi10.1115/1.4004503
dc.journal.fristpage11008
dc.identifier.eissn2381-6910
dc.keywordsPermeability
dc.keywordsPlasma spraying
dc.keywordsSolid oxide fuel cells
dc.keywordsElectrolytes
dc.keywordsPlasmas (Ionized gases)
dc.keywordsFeedstock
dc.keywordsElectrodes AND Leakage
dc.treeJournal of Fuel Cell Science and Technology:;2012:;volume( 009 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record