Show simple item record

dc.contributor.authorSibendu Som
dc.contributor.authorZhaoyu Luo
dc.contributor.authorPeter K. Senecal
dc.contributor.authorEric Pomraning
dc.contributor.authorMax Plomer
dc.contributor.authorDouglas E. Longman
dc.contributor.authorTianfeng Lu
dc.date.accessioned2017-05-09T00:49:37Z
dc.date.available2017-05-09T00:49:37Z
dc.date.copyrightSeptember, 2012
dc.date.issued2012
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-926028#032204_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/148638
dc.description.abstractCombustion in direct-injection diesel engines occurs in a lifted, turbulent diffusion flame mode. Numerous studies indicate that the combustion and emissions in such engines are strongly influenced by the lifted flame characteristics, which are in turn determined by fuel and air mixing in the upstream region of the lifted flame, and consequently by the liquid breakup and spray development processes. From a numerical standpoint, these spray combustion processes depend heavily on the choice of underlying spray, combustion, and turbulence models. The present numerical study investigates the influence of different chemical kinetic mechanisms for diesel and biodiesel fuels, as well as Reynolds-averaged Navier–Stokes (RANS) and large eddy simulation (LES) turbulence models on predicting flame lift-off lengths (LOLs) and ignition delays. Specifically, two chemical kinetic mechanisms for n-heptane (NHPT) and three for biodiesel surrogates are investigated. In addition, the renormalization group (RNG) k-ε (RANS) model is compared to the Smagorinsky based LES turbulence model. Using adaptive grid resolution, minimum grid sizes of 250 μm and 125 μm were obtained for the RANS and LES cases, respectively. Validations of these models were performed against experimental data from Sandia National Laboratories in a constant volume combustion chamber. Ignition delay and flame lift-off validations were performed at different ambient temperature conditions. The LES model predicts lower ignition delays and qualitatively better flame structures compared to the RNG k-ε model. The use of realistic chemistry and a ternary surrogate mixture, which consists of methyl decanoate, methyl nine-decenoate, and NHPT, results in better predicted LOLs and ignition delays. For diesel fuel though, only marginal improvements are observed by using larger size mechanisms. However, these improved predictions come at a significant increase in computational cost.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSimulating Flame Lift-Off Characteristics of Diesel and Biodiesel Fuels Using Detailed Chemical-Kinetic Mechanisms and Large Eddy Simulation Turbulence Model
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4007216
dc.journal.fristpage32204
dc.identifier.eissn1528-8994
dc.keywordsFuels
dc.keywordsTurbulence
dc.keywordsSprays
dc.keywordsDelays
dc.keywordsDiesel
dc.keywordsFlames
dc.keywordsIgnition
dc.keywordsBiodiesel
dc.keywordsMechanisms
dc.keywordsTemperature
dc.keywordsLarge eddy simulation
dc.keywordsCombustion
dc.keywordsEngineering simulation AND Reynolds-averaged Navier–Stokes equations
dc.treeJournal of Energy Resources Technology:;2012:;volume( 134 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record