Show simple item record

dc.contributor.authorWei-Cheng Wang
dc.contributor.authorWilliam L. Roberts
dc.contributor.authorLarry F. Stikeleather
dc.date.accessioned2017-05-09T00:49:37Z
dc.date.available2017-05-09T00:49:37Z
dc.date.copyrightSeptember, 2012
dc.date.issued2012
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-926028#032203_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/148637
dc.description.abstractGas phase decarboxylation of hydrolyzed free fatty acid (FFA) from canola oil has been investigated in two fix-bed reactors by changing reaction parameters such as temperatures, FFA feed rates, and H2 -to-FFA molar ratios. FFA, which contains mostly C18 as well as a few C16 , C20 , C22 , and C24 FFA, was fed into the boiling zone, evaporated, carried by hydrogen flow at the rate of 0.5–20 ml/min, and reacted with the 5% Pd/C catalyst in the reactor. Reactions were conducted atmospherically at 380–450 °C and the products, qualified and quantified through gas chromatography-flame ionization detector (GC-FID), showed mostly n-heptadecane and a few portion of n-C15 , n-C19 , n-C21 , n-C23 as well as some cracking species. Results showed that FFA conversion increased with increasing reaction temperatures but decreased with increasing FFA feed rates and H2 -to-FFA molar ratios. The reaction rates were found to decrease with higher temperature and increase with higher H2 flow rates. Highly selective heptadecane was achieved by applying higher temperatures and higher H2 -to-FFA molar ratios. From the results, as catalyst loading and FFA feed rate were fixed, an optimal reaction temperature of 415 °C as well as H2 -to-FFA molar ratio of 4.16 were presented. These results provided good basis for studying the kinetics of decarboxylation process.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHydrocarbon Fuels From Gas Phase Decarboxylation of Hydrolyzed Free Fatty Acid
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4006867
dc.journal.fristpage32203
dc.identifier.eissn1528-8994
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsChemical kinetics
dc.keywordsFuels
dc.keywordsFracture (Process)
dc.keywordsCatalysts
dc.keywordsHydrogen
dc.keywordsPressure
dc.keywordsSensors AND Boiling
dc.treeJournal of Energy Resources Technology:;2012:;volume( 134 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record