Show simple item record

dc.contributor.authorLiu Heng
dc.contributor.authorSu Wei
dc.contributor.authorZhang Fu-tang
dc.date.accessioned2017-05-09T00:49:17Z
dc.date.available2017-05-09T00:49:17Z
dc.date.copyrightJanuary, 2012
dc.date.issued2012
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-25516#011004_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/148532
dc.description.abstractThis paper investigates the design of a self-oscillation loop for the gyroscope system. The dynamic equations describing this system are analyzed using the method of averaging, and a criterion for selecting the circuit parameters is established based on the analysis. The validity of the criterion and the effectiveness of the control scheme are verified by the experimental results obtained from the control parameters that satisfy or violate the stability criterion. The performance of the self-oscillation loop with a z-axis gyroscope is also evaluated in light of the experimental results. The self-oscillation loop based on the auto gain control scheme effectively tracks the resonance frequency of a z-axis gyroscope. This frequency corresponds to a standard Allan variance of 0.04 Hz in 8 min at natural frequency. The output signal-to-noise ratio (SNR) is about 90 dB, and the vibratory velocity amplitude shows a deviation of 0.5% in 8 min.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOscillation Loop for a Vibratory Gyroscope and Its Experiment Study
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4005048
dc.journal.fristpage11004
dc.identifier.eissn1528-9028
dc.keywordsOscillations
dc.keywordsSignals
dc.keywordsResonance
dc.keywordsCircuits AND Stability
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2012:;volume( 134 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record