Show simple item record

dc.contributor.authorNasser L. Azad
dc.contributor.authorPannag R. Sanketi
dc.contributor.authorJ. Karl Hedrick
dc.date.accessioned2017-05-09T00:49:02Z
dc.date.available2017-05-09T00:49:02Z
dc.date.copyrightSeptember, 2012
dc.date.issued2012
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-926035#051002_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/148444
dc.description.abstractIn this work, a systematic method is introduced to determine the required accuracy of an automotive engine model used for real-time optimal control of coldstart hydrocarbon (HC) emissions. The engine model structure and development are briefly explained and the model predictions versus experimental results are presented. The control design problem is represented with a dynamic optimization formulation on the basis of the engine model and solved using the Pontryagin’s minimum principle (PMP). To relate the level of plant/model mismatch and the control performance degradation in practice, a sensitivity analysis using a computationally efficient method is employed. In this way, the sensitivities or the effects of small parameter variations on the optimal solution, which is the minimum of cumulative tailpipe HC emissions over the coldstart period, are calculated. There is a good agreement between the sensitivity analysis results and the experimental data. The sensitivities indicate the directions of the subsequent parameter estimation and model improvement tasks to enhance the control-relevant accuracy, and thus, the control performance. Furthermore, they provide some insights to simplify the engine model, which is critical for real-time implementation of the coldstart optimal control system.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDetermining Model Accuracy Requirements for Automotive Engine Coldstart Hydrocarbon Emissions Control
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue5
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4006217
dc.journal.fristpage51002
dc.identifier.eissn1528-9028
dc.keywordsEngines
dc.keywordsSensitivity analysis
dc.keywordsAutomotive engines
dc.keywordsEmissions
dc.keywordsOptimal control
dc.keywordsAir pollution control
dc.keywordsIndustrial plants
dc.keywordsCatalysts
dc.keywordsEquations AND Optimization
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2012:;volume( 134 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record