Show simple item record

dc.contributor.authorHaink C. Tu
dc.contributor.authorMichael B. Rannow
dc.contributor.authorMeng Wang
dc.contributor.authorPerry Y. Li
dc.contributor.authorThomas R. Chase
dc.contributor.authorJames D. Van de Ven
dc.date.accessioned2017-05-09T00:48:58Z
dc.date.available2017-05-09T00:48:58Z
dc.date.copyrightNovember, 2012
dc.date.issued2012
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-926036#061002_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/148427
dc.description.abstractEfficient high-speed on/off valves are an enabling technology for applying digital control techniques such as pulse-width-modulation (PWM) to hydraulic systems. Virtually variable displacement pumps (VVDPs) are one application where variable displacement functionality is attained using a fixed-displacement pump paired with an on/off valve and an accumulator. High-speed valves increase system bandwidth and reduce output pressure ripple by enabling higher switching frequencies. In addition to fast switching, on/off valves should also have small pressure drop and low actuation power to be effective in these applications. In this paper, a new unidirectional rotary valve designed for PWM is proposed. The valve is unique in utilizing the hydraulic fluid flowing through it as a power source for rotation. An unoptimized prototype capable of high flow rate (40 lpm), high speed (2.8 ms transition time at 100 Hz PWM frequency), and low pressure drop (0.62 MPa), while consuming little actuation power (<0.5% full power or 30 W, scavenged from fluid stream), has been constructed and experimentally validated. This paper describes the valve design, analyzes its performance and losses, and develops mathematical models that can be used for design and simulation. The models are validated using experimental data from a proof-of-concept prototype. The valve efficiency is quantified and suggestions for improving the efficiency in future valves are provided.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDesign, Modeling, and Validation of a High-Speed Rotary Pulse-Width-Modulation On/Off Hydraulic Valve
dc.typeJournal Paper
dc.journal.volume134
dc.journal.issue6
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4006621
dc.journal.fristpage61002
dc.identifier.eissn1528-9028
dc.keywordsPressure
dc.keywordsFlow (Dynamics)
dc.keywordsStress
dc.keywordsDesign
dc.keywordsValves AND Spin (Aerodynamics)
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2012:;volume( 134 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record