Show simple item record

dc.contributor.authorKatsumasa Miyazaki
dc.contributor.authorMasahito Mochizuki
dc.date.accessioned2017-05-09T00:46:43Z
dc.date.available2017-05-09T00:46:43Z
dc.date.copyrightFebruary, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28540#011701_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147515
dc.description.abstractThe stress intensity factor estimated by the appropriate modeling of components is essential for the evaluation of crack growth behavior in stress corrosion cracking. For the appropriate modeling of a welded component with a crack, it is important to understand the effects of residual stress distribution and the geometry of the component on the stress intensity factor of the surface crack. In this study, the stress intensity factors of surface cracks under two assumed residual stress fields were calculated. As residual stress field, a bending type stress field (tension-compression) and a self-equilibrating stress field (tension-compression-tension) through the thickness were assumed, respectively. The geometries of the components were plate and piping. The assumed surface cracks for those evaluations were a long crack in the surface direction and a semi-elliptical surface crack. In addition, crack growth evaluations were conducted to clarify the effects of residual stress distribution and the geometry of the component. Here, the crack growth evaluation means simulating increments of crack depth and length using crack growth properties and stress intensity factors. The effects of residual stress distribution and component geometry on the stress intensity factor of surface cracks and the appropriate modeling of cracked components are discussed by comparing the stress intensity factors and the crack growth evaluations for surface cracks under residual stress fields.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effects of Residual Stress Distribution and Component Geometry on the Stress Intensity Factor of Surface Cracks
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4002671
dc.journal.fristpage11701
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsStress concentration
dc.keywordsFracture (Materials)
dc.keywordsPipes
dc.keywordsGeometry
dc.keywordsSurface cracks
dc.keywordsTension
dc.keywordsCompression AND Thickness
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record