Show simple item record

dc.contributor.authorLelio Luzzi
dc.contributor.authorValentino Di Marcello
dc.date.accessioned2017-05-09T00:46:42Z
dc.date.available2017-05-09T00:46:42Z
dc.date.copyrightFebruary, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28540#011206_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147509
dc.description.abstractSome innovative nuclear power plant proposals consider for the design tubes of considerable thickness subjected to external pressure (e.g., steam generators tubes). The collapse of thick tubes is expected to be dominated by yielding but, because of the decreasing nature of the postcollapse evolution, interaction with buckling is likely to be significant enough to demand consideration. At the present, few studies have been carried out both experimentally and numerically, as witnessed by the really conservative attitude that codes assume for thick tubes. A numerical investigation has been performed in this context at the Politecnico di Milano, which was originally intended as a support for requesting a relaxation of American Society of Mechanical Engineers (ASME) regulations. Actually, in 2007, ASME code case N-759 was approved, permitting significant thickness saving in the tube design. Nevertheless, the numerical investigation was pursued to assess the influence of different parameters, such as eccentricity, initial stresses, and material hardening, on the collapse of tubes with diameter to thickness ratios D/t<20. Results are thought to be useful under at least two respects: first, providing some understanding on the collapse behavior in a thickness range so far unexplored; second, giving an indication on the assumptions on which computer codes ought to be based when numerical analyses are required.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCollapse of Nuclear Reactor SG Tubes Pressurized From Outside: The Influence of Imperfections
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4002769
dc.journal.fristpage11206
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsStress
dc.keywordsHardening
dc.keywordsCollapse
dc.keywordsThickness
dc.keywordsDesign
dc.keywordsBuckling AND Nuclear reactors
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record