Show simple item record

dc.contributor.authorJ. Michael Rotter
dc.contributor.authorMinjie Cai
dc.contributor.authorJ. Mark F. G. Holst
dc.date.accessioned2017-05-09T00:46:42Z
dc.date.available2017-05-09T00:46:42Z
dc.date.copyrightFebruary, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28540#011204_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147507
dc.description.abstractThin cylindrical shells used in engineering applications are often susceptible to failure by elastic buckling. Most experimental and theoretical research on shell buckling relates only to simple and relatively uniform stress states, but many practical load cases involve stresses that vary significantly throughout the structure. The buckling strength of an imperfect shell under relatively uniform compressive stresses is often much lower than that under locally high stresses, so the lack of information and the need for conservatism have led standards and guides to indicate that the designer should use the buckling stress for a uniform stress state even when the peak stress is rather local. However, this concept leads to the use of much thicker walls than is necessary to resist buckling, so many knowledgeable designers use very simple ideas to produce safe but unverified designs. Unfortunately, very few scientific studies of shell buckling under locally elevated compressive stresses have ever been undertaken. The most critical case is that of the cylinder in which locally high axial compressive stresses develop extending over an area that may be comparable with the characteristic size of a buckle. This paper explores the buckling strength of an elastic cylinder in which a locally high axial membrane stress state is produced far from the boundaries (which can elevate the buckling strength further) and adjacent to a serious geometric imperfection. Care is taken to ensure that the stress state is as simple as possible, with local bending and the effects of internal pressurization eliminated. The study includes explorations of different geometries, different localizations of the loading, and different imperfection amplitudes. The results show an interesting distinction between narrower and wider zones of elevated stresses. The study is a necessary precursor to the development of a complete design rule for shell buckling strength under conditions of locally varying axial compressive stress.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBuckling of Thin Cylindrical Shells Under Locally Elevated Compressive Stresses
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4002771
dc.journal.fristpage11204
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsBuckling
dc.keywordsCompressive stress
dc.keywordsStrips
dc.keywordsCylinders
dc.keywordsPipes
dc.keywordsShells
dc.keywordsCompression AND Membranes
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record