Show simple item record

dc.contributor.authorMasayuki Kamaya
dc.date.accessioned2017-05-09T00:46:40Z
dc.date.available2017-05-09T00:46:40Z
dc.date.copyrightApril, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28543#021205_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147492
dc.description.abstractThe influence of the interaction between two surface cracks on the limit load (LL) was examined by finite element analysis. Circumferential surface cracks were assumed to be on a straight pipe that was subjected to a uniform tensile load. The change in LL due to the relative spacing of cracks and the geometries of the cracks and pipe was investigated. The evaluated LL was equivalent to that of the coalesced crack when the cracks were on the same plane or their offset and horizontal distance were the same, although LL decreased as the offset distance increased in the other cases. It was also revealed that the magnitude of LL depends on the offset distance of the cracks and ratio Rm/t, where Rm is the mean radius of the pipe and t is the thickness of the pipe. Based on these results, combination rules for LL were proposed for integrity assessment of cracked pipes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Combination Rule for Circumferential Surface Cracks on Pipe Under Tension Based on Limit Load Analysis
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4000353
dc.journal.fristpage21205
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsPipes
dc.keywordsSurface cracks
dc.keywordsTension AND Thickness
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record