Show simple item record

dc.contributor.authorMasahito Mochizuki
dc.contributor.authorMasao Toyoda
dc.date.accessioned2017-05-09T00:46:39Z
dc.date.available2017-05-09T00:46:39Z
dc.date.copyrightJune, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28546#031401_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147472
dc.description.abstractA welded joint generally has heterogeneity of strength, material, and fracture toughness. It is important to understand the characteristics of the strength and fracture of welded joints while considering the heterogeneous effect. In particular, the material behavior becomes more complicated when the welded joint with strength heterogeneity is subjected to dynamic rapid loading; for example, the welded heat-affected zone of pipeline steels is softened and welded underground pipelines are affected by a rapid ground sliding in an earthquake. In this paper, the characteristics of the strength and fracture of an undermatched joint under dynamic loading are studied by round-bar tension tests and thermal elastic-plastic analyses. The results show that the strength and fracture characteristics of the undermatched joints should be evaluated based on the effects of the strain rate and the temperature, including the temperature rise during dynamic loading. The tensile strength and the yield stress of the undermatched joints increase with the strain rate and with the decreasing temperature. The strength of the undermatched zone approaches that of the base metal when the thickness of the undermatched zone becomes smaller, and it does not depend on the strain rate. Finally, it is found that the stress-strain distribution affects fracture characteristics such as ductile-to-brittle transition behavior. The fracture characteristics are explained and predicted from the results of stress-strain relations obtained by numerical analysis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePrediction of Ductile-to-Brittle Transition Under Different Strain Rates in Undermatched Welded Joints
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4002670
dc.journal.fristpage31401
dc.identifier.eissn1528-8978
dc.keywordsDeformation
dc.keywordsTemperature
dc.keywordsBrittleness
dc.keywordsStress
dc.keywordsDynamic testing (Materials)
dc.keywordsWelded joints
dc.keywordsFracture (Process)
dc.keywordsThickness
dc.keywordsHeat
dc.keywordsSteel
dc.keywordsDuctile fracture
dc.keywordsBrittle fracture
dc.keywordsBase metals
dc.keywordsNumerical analysis
dc.keywordsYield stress
dc.keywordsTensile strength
dc.keywordsFinite element analysis AND Earthquakes
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record