Show simple item record

dc.contributor.authorShinji Konosu
dc.contributor.authorHikaru Miyata
dc.date.accessioned2017-05-09T00:46:38Z
dc.date.available2017-05-09T00:46:38Z
dc.date.copyrightJune, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28546#031208_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147469
dc.description.abstractAssessment of overlapped internal and external volumetric flaws is one of the most common problems related to pressure vessel and piping components. Under the current fitness for service rules, such as those provided in ASME, BS, and so on, the procedures for the assessment of these flaws have not yet been defined. In this paper, a reference stress, incorporating the decrease in the effective cross section as a function of flaw depth and flaw angle in a cylinder, has been proposed in order to assess the flaws using the simple p-M (pressure-moment) diagram method. Numerous finite element analyses for a cylinder with overlapped internal and external flaws were conducted to verify the proposed procedure. There is good agreement among them.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAssessment of Overlapped Internal and External Volumetric Flaws in p-M Diagram
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4002053
dc.journal.fristpage31208
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsStress
dc.keywordsFinite element analysis
dc.keywordsCollapse
dc.keywordsCylinders
dc.keywordsEquations
dc.keywordsFitness-for-service
dc.keywordsPipes AND Pressure vessels
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record