Show simple item record

dc.contributor.authorY. W. Kwon
dc.contributor.authorY. Esmaeili
dc.contributor.authorC. M. Park
dc.date.accessioned2017-05-09T00:46:37Z
dc.date.available2017-05-09T00:46:37Z
dc.date.copyrightAugust, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28548#044501_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147457
dc.description.abstractBecause most structures are subjected to transient strain-rate loading, an experimental study was conducted to investigate the stress-strain behaviors of an aluminum alloy undergoing varying strain-rate loading. To this end, uniaxial tensile loading was applied to coupons of dog-bone shape such that each coupon underwent two or three different strain-rates, i.e., one rate after another. As a basis, a series of single-strain-rate tests was also conducted with strain-rates of 0.1–10.0 s−1. When the material experienced multistrain-rate loading, the stress-strain curves were significantly different from any single-strain-rate stress-strain curve. The strain-rate history affected the stress-strain curves under multistrain-rate loading. As a result, some simple averaging of single-strain-rate curves did not predict the actual multistrain-rate stress-strain curve properly. Furthermore, the fracture strain under multistrain-rate loading was significantly different from that under any single-strain-rate case. Depending on the applied strain-rates and their sequences, the former was much greater or less than the latter. A technique was proposed based on the residual plastic strain and plastic energy density in order to predict the fracture strain under multistrain-rate loading. The predicted fracture strains generally agreed well with the experimental data. Another observation that was made was that the unloading stress-strain curve was not affected by the previous strain-rate history.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress-Strain Behavior of an Aluminum Alloy Under Transient Strain-Rates
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4003470
dc.journal.fristpage44501
dc.identifier.eissn1528-8978
dc.keywordsAluminum alloys
dc.keywordsStress
dc.keywordsStress-strain curves
dc.keywordsFracture (Process)
dc.keywordsDensity
dc.keywordsTesting
dc.keywordsShapes AND Bone
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record