Show simple item record

dc.contributor.authorDidier Lasseux
dc.contributor.authorYves Jannot
dc.contributor.authorEmmanuel Sauger Benoit Omnes
dc.contributor.authorPascal Jolly
dc.date.accessioned2017-05-09T00:46:37Z
dc.date.available2017-05-09T00:46:37Z
dc.date.copyrightAugust, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28548#041401_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147451
dc.description.abstractIn this work, we address the issue of the sealing performance of ring-shape valve compression packings. Our analysis is focused on the characterization of the permeability of the rings made of die-formed exfoliated graphite. Because of the tight character of the material, significant Klinkenberg effects are expected. In addition, due to the manufacturing process, permeabilities kz and kr as well as Klinkenberg coefficients bz and br in the respective axial and radial directions are markedly different and strongly dependent upon the applied stress. A specific experimental device based on pressure pulse decay of nitrogen through the material was designed for the measurement in each direction under a controlled axial compression. Determination of kz and kr and bz and br is performed on the basis of a nonstationary gas flow model in the radial and axial directions using an inverse procedure applied to the pressure decay signal. Our results confirm the efficiency of the method developed here. They clearly show the anisotropic character of the material (kz is roughly one order of magnitude larger than kr) and the dependence upon axial compression. The present analysis is the key step before further quantification of the leak rate that may result from the permeation through the material as envisaged here as well as through interfaces between the housing, the packings, and the stem.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePermeability Measurement of Graphite Compression Packings
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4002922
dc.journal.fristpage41401
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsPermeability
dc.keywordsPackings (Cushioning)
dc.keywordsCompression
dc.keywordsGraphite
dc.keywordsStress
dc.keywordsSignals
dc.keywordsManufacturing
dc.keywordsSealing (Process)
dc.keywordsFlow (Dynamics)
dc.keywordsGas flow AND Porosity
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record