Show simple item record

dc.contributor.authorM. Utsumi
dc.date.accessioned2017-05-09T00:46:36Z
dc.date.available2017-05-09T00:46:36Z
dc.date.copyrightAugust, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28548#041204_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147446
dc.description.abstractThis paper investigates the use of dynamic vibration absorbers as a means to reduce the vibration of a floating roof due to sloshing caused by long-period earthquakes. It is shown that the damping ratio of the primary system caused by the dynamic vibration absorbers increases with rising filling level, hence increasing the probability of liquid overspilling, although the ratio of the vibration absorbers’ mass to the liquid mass decreases as the filling level rises. We also study dynamic vibration absorbers that can be more easily tuned to the filling-level dependent sloshing frequency. A feature of these vibration absorbers is that they use time-integral feedback of the primary structure’s displacement near the tuning frequency unlike ordinary vibration absorbers. Computer simulation is carried out using a sinusoidal wave function and an actual earthquake ground motion record as the excitation applied to the tank.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleVibration Reduction of a Floating Roof by Dynamic Vibration Absorbers
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4002923
dc.journal.fristpage41204
dc.identifier.eissn1528-8978
dc.keywordsDamping
dc.keywordsVibration
dc.keywordsVibration absorbers
dc.keywordsRoofs
dc.keywordsSloshing AND Displacement
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record