Show simple item record

dc.contributor.authorHany F. Abdalla
dc.contributor.authorMaher Y. A. Younan
dc.contributor.authorMohammad M. Megahed
dc.date.accessioned2017-05-09T00:46:35Z
dc.date.available2017-05-09T00:46:35Z
dc.date.copyrightOctober, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28550#051212_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147431
dc.description.abstractA simplified technique for determining the lower bound shakedown limit load of a structure, employing an elastic–perfectly plastic (EPP) material model, was previously developed and successfully applied to a long radius 90 deg pipe bend (, 2006, “Determination of Shakedown Limit Load for a 90 Degree Pipe Bend Using a Simplified Technique,” ASME J. Pressure Vessel Technol., 128, pp. 618–624). The pipe bend is subjected to steady internal pressure magnitudes and cyclic bending moments. The cyclic bending includes three different loading patterns, namely, in-plane closing, in-plane opening, and out-of-plane bending moment loadings. The simplified technique utilizes the finite element (FE) method and employs a small displacement formulation to determine the shakedown limit load without performing lengthy time consuming full elastic-plastic (ELPL) cyclic loading FE simulations or conventional iterative elastic techniques. In the present research, the simplified technique is further modified to handle structures employing an elastic-linear strain hardening material model following Ziegler’s linear kinematic hardening (KH) rule. The shakedown limit load is determined through the calculation of residual stresses developed within the pipe bend structure accounting for the back stresses, determined from the KH shift tensor, responsible for the rigid translation of the yield surface. The outcomes of the simplified technique showed an excellent correlation with the results of full ELPL cyclic loading FE simulations. The shakedown limit moments output by the simplified technique are utilized to generate shakedown diagrams (Bree diagrams) of the pipe bend for a spectrum of steady internal pressure magnitudes. The generated Bree diagrams are compared with the ones previously generated employing the EPP material model. These indicated relatively conservative shakedown limit moments compared with the ones employing the KH rule.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleShakedown Limit Load Determination for a Kinematically Hardening 90 deg Pipe Bend Subjected to Steady Internal Pressures and Cyclic Bending Moments
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4003474
dc.journal.fristpage51212
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsStress
dc.keywordsPipe bends AND Hardening
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record