Show simple item record

dc.contributor.authorHyeong-Yeon Lee
dc.contributor.authorHong-Yune Park
dc.contributor.authorKee-Nam Song
dc.contributor.authorYong-Wan Kim
dc.contributor.authorSung-Deok Hong
dc.date.accessioned2017-05-09T00:46:34Z
dc.date.available2017-05-09T00:46:34Z
dc.date.copyrightOctober, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28550#051208_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147427
dc.description.abstractA process heat exchanger (PHE) transfers the heat generated from a nuclear reactor to a sulfur-iodine hydrogen production system in the Nuclear Hydrogen Development and Demonstration, and was subjected to very high temperature up to 950°C. An evaluation of creep-fatigue damage, for a prototype PHE, has been carried out from finite element analysis with the full three dimensional model of the PHE. The inlet temperature in the primary side of the PHE was 950°C with an internal pressure of 7 MPa, while the inlet temperature in the secondary side of the PHE is 500°C with internal pressure of 4 MPa. The candidate materials of the PHE were Alloy 617 and Hastelloy X. In this study, only the Alloy 617 was considered because the high temperature design code is available only for Alloy 617. Using the full 3D finite element analysis on the PHE model, creep-fatigue damage evaluation at very high temperature was carried out, according to the ASME Draft Code Case for Alloy 617, and technical issues in the Draft Code Case were raised.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Evaluation of Creep-Fatigue Damage for the Prototype Process Heat Exchanger of the NHDD Plant
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4003466
dc.journal.fristpage51208
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsFatigue
dc.keywordsTemperature
dc.keywordsAlloys
dc.keywordsEngineering prototypes
dc.keywordsHeat exchangers
dc.keywordsDesign
dc.keywordsHigh temperature
dc.keywordsIndustrial plants
dc.keywordsPressure
dc.keywordsHydrogen production AND Stress
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record