Show simple item record

dc.contributor.authorCalvin M. Stewart
dc.contributor.authorYoung Wha Ma
dc.contributor.authorRichard W. Neu
dc.contributor.authorAli P. Gordon
dc.date.accessioned2017-05-09T00:46:34Z
dc.date.available2017-05-09T00:46:34Z
dc.date.copyrightOctober, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28550#051201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147419
dc.description.abstractDirectionally solidified (DS) Ni-base superalloys are commonly used as gas turbine materials to primarily extend the operational lives of components under high load and temperature. The nature of DS superalloy grain structure facilitates an elongated grain orientation, which exhibits enhanced impact strength, high temperature creep and fatigue resistance, and improved corrosion resistance compared with off-axis orientations. Of concern to turbine designers are the effects of cyclic fatigue, thermal gradients, and potential stress concentrations when dealing with orientation-dependent materials. When coupled with a creep environment, accurate prediction of crack initiation and propagation becomes highly dependent on the quality of the constitutive damage model implemented. This paper describes the development of an improved anisotropic tertiary creep damage model implemented in a general-purpose finite element analysis software. The creep damage formulation is a tensorial extension of a variation in the Kachanov–Rabotnov isotropic tertiary creep damage formulation. The net/effective stress arises from the use of the Rabotnov second-rank symmetric damage tensor. The Hill anisotropic behavior analogy is used to model secondary creep and tertiary creep damage behaviors. Using available experimental data for a directionally solidified Ni-base superalloy, the improved formulation is found to accurately model intermediate oriented specimen.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Improved Anisotropic Tertiary Creep Damage Formulation
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4002497
dc.journal.fristpage51201
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsStress
dc.keywordsTensors AND Anisotropy
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record