Show simple item record

dc.contributor.authorMasayuki Kamaya
dc.date.accessioned2017-05-09T00:46:31Z
dc.date.available2017-05-09T00:46:31Z
dc.date.copyrightDecember, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28553#061203_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147400
dc.description.abstractHigh-cycle thermal fatigue is a critical problem in nuclear power plants. To prevent crack initiation, Japan Society of Mechanical Engineers has issued a guideline for design, although growth analysis was not included. In this study, the feasibility of incorporating crack growth analysis into the design and integrity evaluation was investigated. Two characteristics of thermal fatigue loading were considered. The first was the effect of stress gradient in the depth direction. It was shown that the steep stress gradient near the surface significantly reduced the stress intensity factor (SIF) of deep cracks. Assuming that crack growth was arrested by small SIF values, it was judged possible to leave certain detected cracks unrepaired. Otherwise, the cracks should be removed regardless of their size. The other characteristic was the displacement controlled boundary condition. Through finite element analyses, it was revealed that the displacement controlled boundary condition reduced the SIF, and the magnitude of its reduction depended on the crack depth and boundary length. It was concluded that, under thermal fatigue loading, the cracks that were detected in the in-service inspection had already been arrested if they did not penetrate the wall thickness. It is effective to consider the crack arrest scenario for design and integrity assessment of cracked components under high-cycle thermal fatigue loading.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCrack Growth Under High-Cycle Thermal Fatigue Loading: Effects of Stress Gradient and Relaxation in a Crack Network
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4004560
dc.journal.fristpage61203
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsCycles
dc.keywordsFatigue
dc.keywordsGradients
dc.keywordsNetworks
dc.keywordsDisplacement AND Temperature
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record