Show simple item record

dc.contributor.authorFeng Ju
dc.contributor.authorPierre Du Plessis
dc.contributor.authorJohn Aumuller
dc.contributor.authorZihui Xia
dc.date.accessioned2017-05-09T00:46:31Z
dc.date.available2017-05-09T00:46:31Z
dc.date.copyrightDecember, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28553#061202_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147399
dc.description.abstractCoke drums are critical equipment in the petroleum industry. The failure modes of coke drums include excessive bulging deformation and fatigue cracking. The elastic-plastic behavior of a coke drum, subjected to both thermal and mechanical loadings, is analyzed for a complete cycle of operation. The effects of multiple operational cycles and localized hot/cold spots are also investigated. It is found that yielding of the clad layer starts at the very early stage in an operating cycle and permanent deformation is caused in the first operating cycle. Plastic shakedown occurs in the clad layer under combined operating thermal and mechanical loadings. It is also found that both hot and cold spots will cause bulging of the shell and the cold spot can cause more severe deformation than the hot spot.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGlobal and Local Elastic-Plastic Stress Analysis of Coke Drum Under Thermal-Mechanical Loadings
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4002802
dc.journal.fristpage61202
dc.identifier.eissn1528-8978
dc.keywordsCoke
dc.keywordsStress
dc.keywordsCycles
dc.keywordsTemperature
dc.keywordsDeformation
dc.keywordsShells
dc.keywordsPressure AND Stress analysis (Engineering)
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record