Show simple item record

dc.contributor.authorToshimichi Fukuoka
dc.contributor.authorTakashi Fuchikami
dc.contributor.authorMasataka Nomura
dc.date.accessioned2017-05-09T00:46:31Z
dc.date.available2017-05-09T00:46:31Z
dc.date.copyrightDecember, 2011
dc.date.issued2011
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28553#061201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/147398
dc.description.abstractFatigue failures of bolted joints frequently lead to serious accidents in machines and structures. It is well known that fatigue failure is likely to occur around the first thread root of the bolt adjacent to the nut loaded surface and the run-out of bolt thread. That is because high stress amplitudes are generated there due to alternating external forces. Accordingly, it is significantly important to evaluate the stress amplitudes along the thread root in order to rigorously examine the fatigue failure mechanism of bolted joints. In this study, stress amplitude distributions along the thread helix including the thread run-out are analyzed by three-dimensional finite element analysis. The numerical models of the bolted joints are constructed so as to accurately represent the effect of thread helical geometry, using the modeling scheme proposed in the previous study which analyzed the stress concentrations at the thread root. The analytical objectives are bolted joints with axisymmetric geometry except for the helical-shaped threaded portions that are subjected to axisymmetric external forces. It has been substantiated, based on the stress amplitude distributions along the thread helix, which the fatigue failures are likely to originate from the first bolt thread, as in the case of the maximum stress, and the run-out of threads. It has also been shown that a bolt with reduced diameter is effective for the purpose of lowering the stress amplitude at the first thread root of bolt.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFinite Element Analysis of the Cyclic Stress Amplitude of Threaded Fasteners Using Helical Thread Models
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4004559
dc.journal.fristpage61201
dc.identifier.eissn1528-8978
dc.keywordsForce
dc.keywordsStress
dc.keywordsThread
dc.keywordsBolted joints
dc.keywordsFinite element analysis
dc.keywordsFasteners
dc.keywordsFatigue failure
dc.keywordsGeometry AND Computer simulation
dc.treeJournal of Pressure Vessel Technology:;2011:;volume( 133 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record