Show simple item record

dc.contributor.authorPouria Ahmadi
dc.contributor.authorHassan Hajabdollahi
dc.contributor.authorIbrahim Dincer
dc.date.accessioned2017-05-09T00:45:14Z
dc.date.available2017-05-09T00:45:14Z
dc.date.copyrightFebruary, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27906#021801_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146768
dc.description.abstractIn the present work, a thermal modeling is conducted for optimal design of compact heat exchangers in order to minimize cost and entropy generation. In this regard, an ε−NTU method is applied for estimation of the heat exchanger pressure drop, as well as effectiveness. Fin pitch, fin height, fin offset length, cold stream flow length, no-flow length, and hot stream flow length are considered as six decision variables. Fast and elitist nondominated sorting genetic algorithm (i.e., nondominated sorting genetic algorithm II) is applied to minimize the entropy generation units and the total annual cost (sum of initial investment and operating and maintenance costs) simultaneously. The results for Pareto-optimal front clearly reveal the conflict between two objective functions, the number of entropy generation units and the total annual cost. It reveals that any geometrical changes, which decrease the number of entropy generation units, lead to an increase in the total annual cost and vice versa. Moreover, for prediction of the optimal design of the plate fin heat exchanger, an equation for the number of entropy generation units versus the total annual cost is derived for the Pareto curve. In addition, optimization of heat exchangers based on considering exergy destruction revealed that irreversibilities, such as pressure drop and high temperature difference between cold and hot streams, play a key issue in exergy destruction. Thus, more efficient heat exchanger leads to have a heat exchanger with higher total cost rate. Finally, the sensitivity analysis of change in the optimum number of entropy generation units and the total annual cost with change in the decision variables of the plate fin heat exchanger is also performed, and the results are reported.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCost and Entropy Generation Minimization of a Cross-Flow Plate Fin Heat Exchanger Using Multi-Objective Genetic Algorithm
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue2
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4002599
dc.journal.fristpage21801
dc.identifier.eissn1528-8943
dc.keywordsDesign
dc.keywordsHeat exchangers
dc.keywordsModeling
dc.keywordsOptimization
dc.keywordsFunctions
dc.keywordsGenetic algorithms
dc.keywordsFlow (Dynamics)
dc.keywordsEntropy
dc.keywordsPareto optimization
dc.keywordsExergy
dc.keywordsCross-flow AND Pressure drop
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record