Show simple item record

dc.contributor.authorJulien Pellé
dc.contributor.authorSouad Harmand
dc.date.accessioned2017-05-09T00:45:00Z
dc.date.available2017-05-09T00:45:00Z
dc.date.copyrightJuly, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27917#071707_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146660
dc.description.abstractThe experimental work presented in this paper relates to the local convective heat transfer on the rotor surface in the airgap of a discoidal rotor stator system. The stator used in these experiments is a multiperforated disk in which an air suction due to the rotation of the rotor comes through and enters the airgap. A thermal balance equation was used to identify the local convective heat transfer coefficient, with temperatures as boundary conditions, which have been measured by infrared thermography. The influence of the suctions is discussed for an interdisk dimensionless spacing interval G ranging from 0.01 to 0.16 and for Re between 129,000 and 516,000. Results are compared with precedent studies in which we obtained Nusselt numbers with a closed rotor stator system in which stator is a full disk and a rotor stator system with one hole at the stator center. It is shown that multiperforated stator can or cannot improve the rotor cooling, depending on G and Re.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleConvective Heat Transfer in a Rotor Stator System Air Gap With Multiple Suctions of Fluid Through the Stator
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4003606
dc.journal.fristpage71707
dc.identifier.eissn1528-8943
dc.keywordsRotors
dc.keywordsStators
dc.keywordsConvection
dc.keywordsTemperature measurement
dc.keywordsDisks AND Cooling
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record