Show simple item record

dc.contributor.authorChungpyo Hong
dc.contributor.authorYutaka Asako
dc.contributor.authorKoichi Suzuki
dc.date.accessioned2017-05-09T00:45:00Z
dc.date.available2017-05-09T00:45:00Z
dc.date.copyrightJuly, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27917#071706_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146659
dc.description.abstractA concentric micro-annular passage is a basic and important microgeometry of microfluidic-systems from simple heat exchanger to the most complicated nuclear reactors. Therefore, heat transfer characteristics of gaseous flows in concentric micro-annular tubes with constant heat flux whose value was positive or negative were numerically investigated. The slip velocity, temperature jump, and shear stress work were considered on the slip boundary conditions. The numerical methodology was based on the arbitrary-Lagrangian–Eulerian method. The computations were performed for two thermal cases. That is, the heat flux that was constant at the inner wall and outer wall was adiabatic (case 1) and the heat flux that was constant at the outer wall and the inner wall was adiabatic (case 2). Each constant heat flux of 104 Wm−2 for the positive value and −104 Wm−2 for the negative value was chosen. The outer tube radius ranged from 20 μm to 150 μm with the radius ratios of 0.02, 0.05, 0.1, 0.25, and 0.5 and the ratio of length to hydraulic diameter was 100. The stagnation pressure was chosen in such a way that the exit Mach number ranges from 0.1 to 0.8. The outlet pressure was fixed at the atmospheric pressure. The heat transfer characteristics in concentric micro-annular tubes were obtained. The wall and bulk temperatures with positive heat flux are compared with those of negative heat flux cases and also compared with those of the simultaneously developing incompressible flow. The results show that the Nusselt number of compressible slip flow is different from that of incompressible flow. However, the temperatures normalized by heat flux have different trends whether heat flux value is positive or negative. A correlation for the prediction of the heat transfer characteristics of gas slip flow in concentric micro annular tubes is proposed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHeat Transfer Characteristics of Gaseous Slip Flow in Concentric Micro-Annular Tubes
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4003605
dc.journal.fristpage71706
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsMach number
dc.keywordsTemperature
dc.keywordsHeat transfer
dc.keywordsGas flow
dc.keywordsSlip flow
dc.keywordsWall temperature
dc.keywordsHeat flux
dc.keywordsComputation
dc.keywordsPressure
dc.keywordsExterior walls AND Equations
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record