Show simple item record

dc.contributor.authorChien-Hsin Chen
dc.date.accessioned2017-05-09T00:45:00Z
dc.date.available2017-05-09T00:45:00Z
dc.date.copyrightJuly, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27917#071705_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146658
dc.description.abstractA theoretical analysis is presented to explore the transport characteristics of electro-osmotic flow and associated heat transfer of non-Newtonian power-law fluids in a parallel plate microchannel. The formulation shows that the key parameters governing the current problem include the flow behavior index, the length scale ratio (ratio of Debye length to half channel height), and the Joule heating parameter (ratio of Joule heating to surface heat flux). Analytical expressions are presented for velocity and temperature profiles, the friction coefficient, and the fully developed Nusselt number. In particular, closed-form solutions are obtained for several special values of the flow behavior index. The results reveal that reducing the length scale ratio tends to increase the friction coefficient, and the friction coefficient approaches infinite for slug flow. The increase in the friction coefficient due to increasing the flow behavior index is more noticeable for a smaller length scale ratio. For surface heating, increasing the flow behavior index amplifies the temperature difference between the wall and the fluid, and thus the temperature distribution broadens; while the opposite trend is observed for surface cooling with sufficiently large Joule heating parameter with negative sign. Depending on the value of Joule heating parameter, the fully developed Nusselt number can be either increased or decreased by increasing the flow behavior index and/or the length scale ratio. The effect of flow behavior index on the Nusselt number vanishes as the length scale ratio approaches zero (the limiting case for slug flow).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElectro-Osmotic Heat Transfer of Non-Newtonian Fluid Flow in Microchannels
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4003573
dc.journal.fristpage71705
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer
dc.keywordsFluids
dc.keywordsMicrochannels
dc.keywordsFriction
dc.keywordsTemperature
dc.keywordsHeating
dc.keywordsNon-Newtonian fluids
dc.keywordsJoules
dc.keywordsTemperature distribution
dc.keywordsElectroosmosis
dc.keywordsTemperature profiles
dc.keywordsChannels (Hydraulic engineering) AND Cooling
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record