Show simple item record

dc.contributor.authorGiulio Lorenzini
dc.contributor.authorRoberta Lima Corrêa
dc.contributor.authorElizaldo Domingues dos Santos
dc.contributor.authorLuiz Alberto Oliveira Rocha
dc.date.accessioned2017-05-09T00:44:58Z
dc.date.available2017-05-09T00:44:58Z
dc.date.copyrightAugust, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27919#081902_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146643
dc.description.abstractConstructal design is a method that conducts the designer toward flow (e.g., heat flux) architectures that have greater global performance. This numerical work uses this method to seek for the best geometry of a complex assembly of fins, i.e., an assembly where there is a cavity between the two branches of the T-Y-assembly of fins and two additional extended surfaces. The global thermal resistance of the assembly is minimized four times by geometric optimization subject to the following constraints: the total volume, the volume of fin material, the volume of the cavity, and the volume of the two additional extended surfaces. Larger amount of fin material improves the performance of the assembly of fins. The three times optimized global thermal resistance of the complex assembly of fins performs 32% better than the best T-Y-configuration under the same thermal and geometric conditions. The three times minimized global thermal resistance of the complex assembly of fins was correlated by power laws as a function of its corresponding optimal configurations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleConstructal Design of Complex Assembly of Fins
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4003710
dc.journal.fristpage81902
dc.identifier.eissn1528-8943
dc.keywordsManufacturing
dc.keywordsDesign
dc.keywordsOptimization
dc.keywordsFins
dc.keywordsGeometry
dc.keywordsThermal resistance
dc.keywordsCavities
dc.keywordsBifurcation
dc.keywordsShapes AND Flow (Dynamics)
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record