Show simple item record

dc.contributor.authorHie Chan Kang
dc.contributor.authorGil Woong Jun
dc.date.accessioned2017-05-09T00:44:52Z
dc.date.available2017-05-09T00:44:52Z
dc.date.copyrightOctober, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27924#101802_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146585
dc.description.abstractThe present work was conducted to investigate the air-side pressure drop and heat transfer performance of the louver fin-tube heat exchanger for automobile applications. Fourteen kinds of louver fin geometries with different louver pitches and angles were tested in the present work. The f and j factors for plane and louver fin configurations were compared experimentally and numerically. The heat transfer and pressure drop characteristics of the plane fin showed the combined mode of the developing flow on a flat plate and the fully developed flow in the rectangular channel. The heat transfer coefficient of the louver fin was about twice as high as that of the plane fin. Empirical correlations proposed by previous researchers were compared with the present experimental data. Correlations of j and f factors were proposed for the present experimental data. The j and f factors were simply expressed as functions of the average louver pitch, fin pitch, louver angle, and Reynolds number based on the louver pitch. The present correlations of the heat transfer and pressure drop agreed well with the experimental data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHeat Transfer and Flow Resistance Characteristics of Louver Fin Geometry for Automobile Applications
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4004169
dc.journal.fristpage101802
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer
dc.keywordsComputer simulation
dc.keywordsHeat exchangers
dc.keywordsAutomobiles
dc.keywordsFins
dc.keywordsPressure drop
dc.keywordsGeometry
dc.keywordsHeat transfer coefficients
dc.keywordsElectrical resistance
dc.keywordsFlat plates AND Reynolds number
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record