Show simple item record

dc.contributor.authorM. Izadi
dc.contributor.authorD. K. Aidun
dc.contributor.authorP. Marzocca
dc.contributor.authorH. Lee
dc.date.accessioned2017-05-09T00:44:52Z
dc.date.available2017-05-09T00:44:52Z
dc.date.copyrightOctober, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27924#101801_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146584
dc.description.abstractThis paper describes an advanced monitoring system for fouling phenomenon in a wide range of tubular heat exchangers such as condensers and intercoolers. First, a mathematical model of fouling resistance in tubular heat exchangers is adapted. The model is based on the applied thermal power, the inside heat transfer coefficient, and geometrical characteristics of the heat exchanger under consideration. The resulting model is a function of measured quantities such as water and tube wall temperatures, fluid flow velocity, and some physical properties of the fluid flowing inside the tubes, such as viscosity, conductivity, and density. Second, an on-line fouling monitoring system was prepared, and the heat transfer resistance for selected solutions was measured in real time by this system. The effect of concentration and chemical reactions on fouling was studied experimentally using contaminants such as sodium bicarbonate, sodium chloride, calcium chloride, and a mixture of sodium bicarbonate and calcium chloride. Experimental results provide quantitative information of liquid-side fouling on heat transfer surfaces, and its effects on the thermal efficiency. Experimental data are critical for heat exchanger design and for planning operating and cleaning schedules of the heat exchanger. Uncertainty analysis shows that the experimental results are acceptable and the experimental setup is appropriate for measuring fouling resistance in industrial applications.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Investigation of Fouling Behavior of 90/10 Cu/Ni Tube by Heat Transfer Resistance Monitoring Method
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4004165
dc.journal.fristpage101801
dc.identifier.eissn1528-8943
dc.keywordsHeat transfer
dc.keywordsElectrical resistance
dc.keywordsHeat exchangers
dc.keywordsWater
dc.keywordsSodium AND Uncertainty
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record