Show simple item record

dc.contributor.authorYoungsuk Nam
dc.contributor.authorStephen Sharratt
dc.contributor.authorGilhwan Cha
dc.contributor.authorY. Sungtaek Ju
dc.date.accessioned2017-05-09T00:44:51Z
dc.date.available2017-05-09T00:44:51Z
dc.date.copyrightOctober, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27924#101502_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146576
dc.description.abstractMicro heat pipes incorporating advanced wicks are promising for the thermal management of power electronics. We report the heat transfer performance of superhydrophilic Cu micropost wicks fabricated on thin silicon substrates using electrochemical deposition and controlled chemical oxidation. For a fixed post diameter, the interpost spacing and hence solid fraction is found to be a main design factor affecting the effective heat transfer coefficient and critical heat flux. The effective heat transfer coefficient >10 W/cm2 K and the critical heat flux >500 W/cm2 over 2 mm × 2 mm heating areas are demonstrated. Copper oxide nanostructures formed on the micropost surfaces significantly enhance the critical heat flux without compromising the effective heat transfer coefficient. An approximate numerical model is developed to help interpret the experimental data. A surface energy minimization algorithm is used to predict the static equilibrium shape of a liquid meniscus, which is then imported into a finite element model to predict the effective heat transfer coefficient. The advanced wick structures and experimental and modeling approaches developed in this work will help develop thin and lightweight thermal management solutions for high-power-density semiconductor devices.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacterization and Modeling of the Heat Transfer Performance of Nanostructured Cu Micropost Wicks
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4004168
dc.journal.fristpage101502
dc.identifier.eissn1528-8943
dc.keywordsHeat
dc.keywordsHeat transfer
dc.keywordsModeling
dc.keywordsShapes
dc.keywordsHeat transfer coefficients
dc.keywordsTemperature
dc.keywordsCritical heat flux
dc.keywordsHeat pipes
dc.keywordsComputer simulation
dc.keywordsCopper
dc.keywordsEquilibrium (Physics)
dc.keywordsoxidation
dc.keywordsNanostructures
dc.keywordsFinite element model AND Silicon
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record