Show simple item record

dc.contributor.authorA. Tamayol
dc.contributor.authorK. Hooman
dc.date.accessioned2017-05-09T00:44:48Z
dc.date.available2017-05-09T00:44:48Z
dc.date.copyrightNovember, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27926#111801_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146558
dc.description.abstractUsing a thermal resistance approach, forced convection heat transfer through metal foam heat exchangers is studied theoretically. The complex microstructure of metal foams is modeled as a matrix of interconnected solid ligaments forming simple cubic arrays of cylinders. The geometrical parameters are evaluated from existing correlations in the literature with the exception of ligament diameter which is calculated from a compact relationship offered in the present study. The proposed, simple but accurate, thermal resistance model considers: the conduction inside the solid ligaments, the interfacial convection heat transfer, and convection heat transfer to (or from) the solid bounding walls. The present model makes it possible to conduct a parametric study. Based on the generated results, it is observed that the heat transfer rate from the heated plate has a direct relationship with the foam pore per inch (PPI) and solidity. Furthermore, it is noted that increasing the height of the metal foam layer augments the overall heat transfer rate; however, the increment is not linear. Results obtained from the proposed model were successfully compared with experimental data found in the literature for rectangular and tubular metal foam heat exchangers.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermal Assessment of Forced Convection Through Metal Foam Heat Exchangers
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4004530
dc.journal.fristpage111801
dc.identifier.eissn1528-8943
dc.keywordsHeat transfer
dc.keywordsForced convection
dc.keywordsHeat exchangers
dc.keywordsMetal foams
dc.keywordsModeling AND Convection
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record