Show simple item record

dc.contributor.authorJulien Pellé
dc.contributor.authorSouad Harmand
dc.date.accessioned2017-05-09T00:44:48Z
dc.date.available2017-05-09T00:44:48Z
dc.date.copyrightNovember, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27926#111702_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146555
dc.description.abstractThe present work relates to an experimental study of the local convective heat transfer over the rotor surface in the air-gap of a discoidal rotor–stator system. This configuration is of interest namely, in electrical machines or tubomachinery. Following precedent studies obtained for a single rotating disk or a closed (but unshrouded) rotor–stator system, an air suction comes through the stator and enters the air-gap in this particular work. Determination of Nusselt numbers is based on the use of infrared thermography. The influence of the suction is discussed for an interdisk dimensionless spacing interval, G ranging from 0.01 to 0.16 and for a rotational Reynolds number, Re between 30,000 and 5,16,000. Results shows that the suction could locally provide better cooling than in the closed rotor–stator and in the single disk configurations, even if the main influence is a decrease in the convective heat transfer.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleConvective Heat Transfer in a Rotor–Stator System Airgap With a Centered Natural Suction of Fluid
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4004344
dc.journal.fristpage111702
dc.identifier.eissn1528-8943
dc.keywordsConvection
dc.keywordsRotors
dc.keywordsStators
dc.keywordsSuction
dc.keywordsTemperature measurement AND Disks
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record