Show simple item record

dc.contributor.authorK. Hari Krishna
dc.contributor.authorHarish Ganapathy
dc.contributor.authorG. Sateesh
dc.contributor.authorSarit K. Das
dc.date.accessioned2017-05-09T00:44:48Z
dc.date.available2017-05-09T00:44:48Z
dc.date.copyrightNovember, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27926#111501_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146552
dc.description.abstractNanofluids, solid-liquid suspensions with solid particles of size of the order of few nanometers, have created interest in many researchers because of their enhancement in thermal conductivity and convective heat transfer characteristics. Many studies have been done on the pool boiling characteristics of nanofluids, most of which have been with nanofluids containing oxide nanoparticles owing to the ease in their preparation. Deterioration in boiling heat transfer was observed in some studies. Metallic nanofluids having metal nanoparticles, which are known for their good heat transfer characteristics in bulk regime, reported drastic enhancement in thermal conductivity. The present paper investigates into the pool boiling characteristics of metallic nanofluids, in particular of Cu-H2O nanofluids, on flat copper heater surface. The results indicate that at comparatively low heat fluxes, there is deterioration in boiling heat transfer with very low particle volume fraction of 0.01%, and it increases with volume fraction and shows enhancement with 0.1%. However, the behavior is the other way around at high heat fluxes. The enhancement at low heat fluxes is due to the fact that the effect of formation of thin sorption layer of nanoparticles on heater surface, which causes deterioration by trapping the nucleation sites, is overshadowed by the increase in microlayer evaporation, which is due to enhancement in thermal conductivity. Same trend has been observed with variation in the surface roughness of the heater as well.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePool Boiling Characteristics of Metallic Nanofluids
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4002597
dc.journal.fristpage111501
dc.identifier.eissn1528-8943
dc.keywordsNanofluids
dc.keywordsPool boiling
dc.keywordsBoiling
dc.keywordsHeat transfer
dc.keywordsSurface roughness AND Nanoparticles
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record