Show simple item record

dc.contributor.authorMohammad O. Hamdan
dc.contributor.authorEmad Elnajjar
dc.contributor.authorYousef Haik
dc.date.accessioned2017-05-09T00:44:46Z
dc.date.available2017-05-09T00:44:46Z
dc.date.copyrightDecember, 2011
dc.date.issued2011
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27928#122203_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146539
dc.description.abstractThe paper investigates experimentally and numerically the heat transfer augmentation from a semicircular heated surface due to confined slot-jet impingement. For different Reynolds numbers, the average and local Nusselt numbers are calculated by reporting the heater thermal image obtained by an infrared camera, the inlet and outlet flow temperature via thermocouples, the flow rate via rotameter, and the pressure drop across the inlet and outlet flow via pressure transducers. The single enclosed jet flow is used to create a single cyclone inside the internal semicircular channel to promote the heat transfer at different jet Reynolds numbers (Rejet = 1000–5000). Three turbulence models, namely, the standard k – ɛ, k – ω and the Reynolds stress model (RSM) have been investigated in the present paper by comparing Nusselt number and normalized pressure drop distribution against the experimental data, helping ascertain on the relative merits of the adopted models. The computational fluid dynamics results show that the RSM turbulent model reasonably forecast the experimental data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMeasurement and Modeling of Confined Jet Discharged Tangentially on a Concave Semicylindrical Hot Surface
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4004529
dc.journal.fristpage122203
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsHeat transfer
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsTurbulence
dc.keywordsReynolds number
dc.keywordsCurved walls
dc.keywordsComputational fluid dynamics
dc.keywordsModeling
dc.keywordsPressure drop
dc.keywordsHeat flux
dc.keywordsStress
dc.keywordsJets
dc.keywordsThermocouples
dc.keywordsPressure transducers
dc.keywordsHeat
dc.keywordsCooling AND Pressure
dc.treeJournal of Heat Transfer:;2011:;volume( 133 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record