Show simple item record

dc.contributor.authorRizwan Raza
dc.contributor.authorGhazanfar Abbas
dc.contributor.authorS. Khalid Imran
dc.contributor.authorImran Patel
dc.contributor.authorBin Zhu
dc.date.accessioned2017-05-09T00:44:37Z
dc.date.available2017-05-09T00:44:37Z
dc.date.copyrightAugust, 2011
dc.date.issued2011
dc.identifier.issn2381-6872
dc.identifier.otherJFCSAU-28949#041012_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/146468
dc.description.abstractOxide based two phase composite electrolyte (Ce0.9Gd0.1O2–Y2O3) was synthesized by coprecipitation method. The nanocomposite electrolyte showed the significant performance of power density 785 mW cm−2 and higher conductivities at relatively low temperature 550°C. Ionic conductivities were measured with ac impedance spectroscopy and four-probe dc method. The structural and morphological properties of the prepared electrolyte were investigated by scanning electron microscope (SEM). The thermal stability was determined with differential scanning calorimetry. The particle size that was calculated with Scherrer formula, 15–20 nm, is in a good agreement with the SEM and X- ray diffraction results. The purpose of this study is to introduce the functional nanocomposite materials for advanced fuel cell technology to meet the challenges of solid oxide fuel cell.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGDC-Y2O3 Oxide Based Two Phase Nanocomposite Electrolyte
dc.typeJournal Paper
dc.journal.volume8
dc.journal.issue4
dc.journal.titleJournal of Fuel Cell Science and Technology
dc.identifier.doi10.1115/1.4003634
dc.journal.fristpage41012
dc.identifier.eissn2381-6910
dc.keywordsComposite materials
dc.keywordsElectrolytes
dc.keywordsNanocomposites
dc.keywordsFuel cells AND Ionic conductivity
dc.treeJournal of Fuel Cell Science and Technology:;2011:;volume( 008 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record