Show simple item record

dc.contributor.authorTan Nguyen
dc.contributor.authorStefan Miska
dc.contributor.authorMengjiao Yu
dc.contributor.authorNicholas Takach
dc.date.accessioned2017-05-09T00:43:19Z
dc.date.available2017-05-09T00:43:19Z
dc.date.copyrightJune, 2011
dc.date.issued2011
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26576#023102_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/145858
dc.description.abstractBarite Sag is the settling of barite particles in the wellbore (or other weighting materials), which results in undesirable fluctuations in drilling fluid density. A variety of major drilling problems including lost circulation, well control difficulties, poor cement jobs, and stuck pipe can result from uncontrolled barite sag. Study of this phenomenon and how to mitigate its effects has long been of interest. This paper describes a fundamental mathematical approach to analyze the settling of barite particles in shear flow of Newtonian fluids. A set of four coupled partial differential equations to describe dynamic barite sag in Newtonian fluids in pipe flow is obtained by applying mass and momentum conservation for solid and liquid phase. Solid concentration in axial and radial directions as a function of time is calculated by using an explicit numerical method to solve these equations. A number of experiments in a flow loop were conducted to verify the mathematical model. Two mass flow meters were installed at the inlet and outlet of the flow loop’s test section. Differences in the density measurements over time were converted to the solid accumulation, which was compared with results from the modeling. In addition, based on the experimental results, three different stages of barite accumulation due to the settling and bed pickup of barite particles during circulation will be presented. The proposed methodology and results of this study will help drillers have a better understanding in terms of undesirable density fluctuations and barite bed characteristics.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePredicting Dynamic Barite Sag in Newtonian-Oil Based Drilling Fluids in Pipe
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4004026
dc.journal.fristpage23102
dc.identifier.eissn1528-8994
dc.keywordsDensity
dc.keywordsFlow (Dynamics)
dc.keywordsFluids
dc.keywordsParticulate matter
dc.keywordsDrilling
dc.keywordsPipes
dc.keywordsEquations
dc.keywordsShear flow
dc.keywordsFluid density
dc.keywordsMomentum
dc.keywordsModeling AND Pipe flow
dc.treeJournal of Energy Resources Technology:;2011:;volume( 133 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record