Show simple item record

dc.contributor.authorAhmed M. Gomaa
dc.contributor.authorHisham A. Nasr-El-Din
dc.date.accessioned2017-05-09T00:43:18Z
dc.date.available2017-05-09T00:43:18Z
dc.date.copyrightJune, 2011
dc.date.issued2011
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26576#023101_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/145856
dc.description.abstractRecent laboratory and field studies indicated that polymer-based in situ gelled acids can cause formation damage. Coreflood experiments using single-stage and multistage acids were conducted at 250 °F. 15 wt. % regular HCl and 5 wt. % in situ gelled acid-based on Fe(III) as a crosslinker were the acids that were used in this study. Propagation of acids and crosslinker inside 20 in. long cores was examined for the first time in detail. Stage volume and injection rate, which were the parameters that affect the propagating of various chemical species, were examined. Samples of the core effluent were collected and the concentrations of calcium, crosslinker, and acid were measured. Material balance was conducted to determine the amount of cross-liker that retained in the core. The results show that in situ gelled acid should be pumped at low injection rates. In situ gelled acid at low injection rate instantaneously plugged the tip of the wormhole and did not create additional wormholes inside the core. Therefore, when the final regular acid stage bypassed the gel, it started to propagate from nearly the last point that the first stage ended. In site gelled acid stage volume should not exceed 0.5 PV. No benefits were gained by increasing the volume of in situ gelled acids. Retention of total iron in the core increased in multistage acid treatments, especially at low acid injection rates.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePropagation of Regular HCl Acids in Carbonate Rocks: The Impact of an In Situ Gelled Acid Stage
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4004027
dc.journal.fristpage23101
dc.identifier.eissn1528-8994
dc.keywordsPolymers
dc.keywordsIron
dc.keywordsPressure drop
dc.keywordsFlow (Dynamics)
dc.keywordsRocks
dc.keywordsViscosity AND Permeability
dc.treeJournal of Energy Resources Technology:;2011:;volume( 133 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record