Show simple item record

dc.contributor.authorL. Battisti
dc.contributor.authorV. Dossena
dc.contributor.authorG. Persico
dc.contributor.authorL. Zanne
dc.contributor.authorS. Dell’Anna
dc.contributor.authorB. Paradiso
dc.date.accessioned2017-05-09T00:43:17Z
dc.date.available2017-05-09T00:43:17Z
dc.date.copyrightSeptember, 2011
dc.date.issued2011
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26578#031201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/145844
dc.description.abstractThis paper presents the first results of a wide experimental investigation on the aerodynamics of a vertical axis wind turbine. Vertical axis wind turbines have recently received particular attention, as interesting alternative for small and micro generation applications. However, the complex fluid dynamic mechanisms occurring in these machines make the aerodynamic optimization of the rotors still an open issue and detailed experimental analyses are now highly recommended to convert improved flow field comprehensions into novel design techniques. The experiments were performed in the large-scale wind tunnel of the Politecnico di Milano (Italy), where real-scale wind turbines for micro generation can be tested in full similarity conditions. Open and closed wind tunnel configurations are considered in such a way to quantify the influence of model blockage for several operational conditions. Integral torque and thrust measurements, as well as detailed aerodynamic measurements were carried out to characterize the 3D flow field downstream of the turbine. The local unsteady flow field and the streamwise turbulent component, both resolved in phase with the rotor position, were derived by hot wire measurements. The paper critically analyses the models and the correlations usually applied to correct the wind tunnel blockage effects. Results highlight that the presently available theoretical correction models do not provide accurate estimates of the blockage effect in the case of vertical axis wind turbines. The tip aerodynamic phenomena, in particular, seem to play a key role for the prediction of the turbine performance; large-scale unsteadiness is observed in that region and a simple flow model is used here to explain the different flow features with respect to horizontal axis wind turbines.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAerodynamic Measurements on a Vertical Axis Wind Turbine in a Large Scale Wind Tunnel
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4004360
dc.journal.fristpage31201
dc.identifier.eissn1528-8994
dc.keywordsFlow (Dynamics)
dc.keywordsMeasurement
dc.keywordsThrust
dc.keywordsWakes
dc.keywordsRotors
dc.keywordsTurbines
dc.keywordsBlades
dc.keywordsWind tunnels
dc.keywordsWind turbines
dc.keywordsVertical axis wind turbines
dc.keywordsTunnels
dc.keywordsTurbulence
dc.keywordsUnsteady flow AND Wake turbulence
dc.treeJournal of Energy Resources Technology:;2011:;volume( 133 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record