Show simple item record

dc.contributor.authorVadim S. Tikhonov
dc.contributor.authorAlexander I. Safronov
dc.date.accessioned2017-05-09T00:43:16Z
dc.date.available2017-05-09T00:43:16Z
dc.date.copyrightDecember, 2011
dc.date.issued2011
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26579#043102_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/145840
dc.description.abstractOne of the most serious concerns of extended-reach drilling is the dynamic behavior of the drillstring and the cleaning of well. Good cleaning requires an increased angular velocity. This paper presents a 3D nonlinear dynamic model of drillstring in a wellbore of 3D profile. The model suggests possible contact/lift-off of drill pipes with/from the wellbore wall. The interaction of lateral, torsional, and axial vibrations is taken into account. The relation between the normal component of contact force and the deformation of the wellbore wall is taken as quadratic-elastic. The friction force is described based on a hysteretic dynamic model. The friction force model also takes into account, the transition from a sliding to whirling. The equations of drillstring dynamics are solved numerically using the method of lines. The DYNTUB software is developed to analyze the drillstring time-varying processes under different loads. The program is used to study the effects of angular velocity, compression load, torque, friction factor, well profile, and availability of connectors on the drillstring dynamic behavior. From the study follows the key conclusions: (1) The friction factor has a considerable effect on the drillstring rotational behavior in the wellbore; (2) no whirling of drillstring at real value of rolling friction factor in a horizontal well in the discussed examples could be seen at all; (3) when whirling takes place, the contact force shows a dramatic times increase; and (4) snaking can be seen in any wells at moderate compressive load and angular velocity.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Postbuckling Drillstring Vibrations in Rotary Drilling of Extended-Reach Wells
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4005241
dc.journal.fristpage43102
dc.identifier.eissn1528-8994
dc.keywordsFriction
dc.keywordsWells
dc.keywordsDrills (Tools)
dc.keywordsDrilling
dc.keywordsStress
dc.keywordsPipes
dc.keywordsVibration
dc.keywordsForce
dc.keywordsRolling friction
dc.keywordsWhirls
dc.keywordsRotation
dc.keywordsKnudsen number
dc.keywordsEquations
dc.keywordsBoundary-value problems
dc.keywordsTorque AND Buckling
dc.treeJournal of Energy Resources Technology:;2011:;volume( 133 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record