Show simple item record

dc.contributor.authorZhen Ren
dc.contributor.authorGuoming G. Zhu
dc.date.accessioned2017-05-09T00:43:03Z
dc.date.available2017-05-09T00:43:03Z
dc.date.copyrightMarch, 2011
dc.date.issued2011
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26546#021012_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/145731
dc.description.abstractThis paper applies integrated system modeling and control design process to a continuously variable valve timing (VVT) actuator system that has different control input and cam position feedback sample rates. Due to high cam shaft torque disturbance and high actuator open-loop gain, it is also difficult to maintain the cam phase at the desired constant level with an open-loop controller for system identification. As a result, multirate closed-loop system identification becomes necessary. For this study, a multirate closed-loop system identification method, pseudo-random binary signal q-Markov Cover, was used for obtaining linearized system models of the nonlinear physical system at different engine operational conditions; and output covariance constraint (OCC) controller, an H2 controller, was designed based upon the identified nominal model and evaluated on the VVT test bench. Performance of the designed OCC controller was compared with that of the well-tuned baseline proportional-integral (PI) controller on the test bench. Results show that the OCC controller uses less control effort and has significant lower overshoot than those of PI ones.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIntegrated System ID and Control Design for an IC Engine Variable Valve Timing System
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue2
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4003263
dc.journal.fristpage21012
dc.identifier.eissn1528-9028
dc.keywordsControl equipment
dc.keywordsEngines
dc.keywordsActuators
dc.keywordsDesign
dc.keywordsValves
dc.keywordsClosed loop systems
dc.keywordsSignals
dc.keywordsIntegrated systems
dc.keywordsIndustrial plants AND Torque
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2011:;volume( 133 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record