| dc.contributor.author | Willem-Jan Evers | |
| dc.contributor.author | Arjan Teerhuis | |
| dc.contributor.author | Igo Besselink | |
| dc.contributor.author | Henk Nijmeijer | |
| dc.contributor.author | Albert van der Knaap | |
| dc.date.accessioned | 2017-05-09T00:43:00Z | |
| dc.date.available | 2017-05-09T00:43:00Z | |
| dc.date.copyright | July, 2011 | |
| dc.date.issued | 2011 | |
| dc.identifier.issn | 0022-0434 | |
| dc.identifier.other | JDSMAA-26556#041008_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/145696 | |
| dc.description.abstract | The high energy consumption of market-ready active suspension systems is the limiting factor in the competition with semi-active devices. The variable geometry active suspension is an alternative with a significantly lower power consumption. However, previous designs suffer from packaging problems, nonlinear stiffness characteristics, and failsafe issues. This paper discusses the feasibility of a recently presented, new design, variable geometry actuator, which has a fixed spring and constant stiffness. An actuator model is derived that includes the electric motor and friction characteristics. Using this model, a cascaded controller is developed and the steady-state and dynamic properties are evaluated. The simulation results are validated with prototype tests. The results show a good correspondence between simulations and measurements. Furthermore, a 10 Hz bandwidth can be easily obtained. It is concluded that the electromechanical low-power active suspension design is feasible and that the model gives a fairly accurate representation of both the steady-state and dynamic characteristics of the prototype. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | The Electromechanical Low-Power Active Suspension: Modeling, Control, and Prototype Testing | |
| dc.type | Journal Paper | |
| dc.journal.volume | 133 | |
| dc.journal.issue | 4 | |
| dc.journal.title | Journal of Dynamic Systems, Measurement, and Control | |
| dc.identifier.doi | 10.1115/1.4003278 | |
| dc.journal.fristpage | 41008 | |
| dc.identifier.eissn | 1528-9028 | |
| dc.keywords | Force | |
| dc.keywords | Friction | |
| dc.keywords | Electric motors | |
| dc.keywords | Control equipment | |
| dc.keywords | Engineering prototypes | |
| dc.keywords | Actuators | |
| dc.keywords | Design | |
| dc.keywords | Energy consumption | |
| dc.keywords | Stiffness | |
| dc.keywords | Springs | |
| dc.keywords | Steady state AND Geometry | |
| dc.tree | Journal of Dynamic Systems, Measurement, and Control:;2011:;volume( 133 ):;issue: 004 | |
| dc.contenttype | Fulltext | |