Show simple item record

dc.contributor.authorStan van der Meulen
dc.contributor.authorRokus van Iperen
dc.contributor.authorBram de Jager
dc.contributor.authorFrancis van der Sluis
dc.contributor.authorMaarten Steinbuch
dc.contributor.authorFrans Veldpaus
dc.date.accessioned2017-05-09T00:43:00Z
dc.date.available2017-05-09T00:43:00Z
dc.date.copyrightJuly, 2011
dc.date.issued2011
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26556#041004_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/145692
dc.description.abstractA reduction in the fuel consumption of a passenger car with a pushbelt continuously variable transmission (CVT) can be established via optimization of the hydraulic actuation system. This requires a model of the dynamic characteristics with low complexity and high accuracy, e.g., for closed-loop control design, for closed-loop simulation, and for optimization of design parameters. The hydraulic actuation system includes a large number of hydraulic components and a model of the dynamic characteristics is scarce, which is caused by the complexity, the nonlinearity, and the necessity of a large number of physical parameters that are uncertain or unknown. In this paper, a modular model for the hydraulic actuation system on the basis of first principles is constructed and validated, which is characterized by a relatively low complexity and a reasonably high accuracy. A modular approach is pursued with respect to the first principles models of the hydraulic components, i.e., a hydraulic pump, spool valves, proportional solenoid valves, channels, and hydraulic cylinders, which reduces complexity and improves transparency. The model parameters are either directly provided, directly measured, or identified. The model of the hydraulic actuation system is composed of the models of the hydraulic components and is experimentally validated by means of measurements that are obtained from a production pushbelt CVT. Several experiment types are considered. The correspondence between the measured and simulated responses is fairly good.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Validated Modular Model for Hydraulic Actuation in a Pushbelt Continuously Variable Transmission
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4003207
dc.journal.fristpage41004
dc.identifier.eissn1528-9028
dc.keywordsForce
dc.keywordsValves
dc.keywordsSolenoids
dc.keywordsPressure
dc.keywordsHydraulic pumps
dc.keywordsFlow (Dynamics) AND Measurement
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2011:;volume( 133 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record